How to Reset Mediacom Router – Complete Guide and Troubleshooting Tips

Disclaimer: We are a team of Network Engineers and Computer Experts with a wealth of experience in networking. We employ our experience in testing modems and routers with different service providers and recommends the most optimal devices, suitable for you. Also, We may earn small commisison on the qualified purchases at no extra cost to you

While trying the complex troubleshooting ways, it is easy to forget that sometimes you simply must reset your device for it to work again. Resetting your Mediacom router will clear out any memory errors and allow your router to start over with default fresh settings. You can recover the default password for your Mediacom router by resetting it.

There are many reasons why resetting your Mediacom router is necessary, so I will show you how to reset your Mediacom router using the reset button. I will also provide some troubleshooting tips in case you encounter any problems resetting the device.

To reset your Mediacom router, look for the reset button on the back of the unit. Once you have located the button, use a paperclip or other sharp object and press, and hold the button for 30 seconds. The reset process will take a few minutes to complete and once it is finished, your router will be reset to its factory default settings.

Read on to know detailed reasons for the need to reset your Mediacom router and what hurdles you may face while resetting it.

Also Read: Complete Review of Mediacom Approved Modems – Self Tested

What are the Benefits of Resetting Mediacom Router?

When you reset your Mediacom router, it clears out any memory errors and allows the router to start over with default, fresh settings. This can be helpful if you’re experiencing problems with your Wi-Fi connection, such as a weak signal or difficulty connecting to the network.

Resetting your Mediacom router can also help resolve issues with your router’s web interface, such as if you can’t access the settings page. It also helps in resetting the password for your router in case you have forgotten it.

Also Read: How To Activate Spectrum Modem

Why Resetting Your Mediacom Router is Necessary?

If you are a Mediacom internet user, the Mediacom router is a must-have add-on device connected to a modem to transmit Wi-Fi signals in your home.

When you reset it, all the settings are cleared out and given fresh starts with a simple click! Resetting the router can be necessary if something has gone wrong in its settings.

You also need to reset it if the Wi-Fi signals usually drop or if you feel issues with the internet speed. Also, if you are moving to a new place and want to use the Mediacom router, you’ll need to reset it again.

Also Read: How to Resolve Centurylink Internet Not Working Issue

Quick Process of Resetting Any Mediacom Compatible Router by Reset Button

There are a couple of steps to follow to reset your Mediacom router.

  1. The first step is to find the reset button on the back of the unit and press it for about 30 seconds.
  2. Once you have done that, release the button and wait for your router to restart.
  3. If this doesn’t work, you can also try unplugging your router from the power outlet and plugging it back in after about 15 seconds. Once your router has restarted, you can begin using it again.
  4. Make sure that you’re pressing the reset button for at least 30 seconds. If you still can’t get your router to reset, you may need to restart your computer or other devices that are connected to your router.
  5. Once you’ve successfully reset your Mediacom router, you’ll need to reconfigure it. This includes setting up your wireless network and password, as well as any other custom settings that you may have.

If you’re having trouble resetting your router, there are a few troubleshooting tips later in this article that can help.

But before starting the reset process, we recommend that you need backup your previous settings in case something wrong goes, you could at least restore your previous settings.

Also Read: Detailed Guide to Reset Charter Spectrum Modem and Router

Step by Step Guide to Enter the Mediacom Control Panel and Create a Backup

Most of the time, you may rush to reset the router but eventually realize that the internet isn’t still working, and all the previous settings are also gone. So, to save your previous settings by taking a backup of your Mediacom router settings, you’ll need to log in to the control panel.

Follow these steps to create a backup of your Mediacom router:

  1. First, go to your computer’s browser and 192.168.0.1 into your web browser’s address bar. If that address doesn’t work, click here to go to the Mediacom login page
  2. Now enter the username and password of your router. Usually, the username is “admin” and the password is the MAC address of your router. However, you will use your username password if you have already changed it.
  3. After going to the Login page, click on Network Manager Page
  4. Once you’ve logged in, click on the “Backup” tab, and then select the “Backup Now” button. This will save a copy of your current settings to your computer.
  5. If you ever need to restore these settings, simply click on the “Restore” tab and then select the “Restore from File” button. Browse to the backup file that you created earlier and then click on the “Open” button. Your router will then be restored to its previous state.

If you can’t find the backup button, you can simply take the screenshots of all the Wi-Fi, network, IPV4/IPV6, and Ethernet/PPOE settings. You can manually enter all the information in the respective fields once the reset process is done.

Recommended Article: Cox Internet Compatible Modems Reviews

Detailed Steps to Manually Reset Your Mediacom Router

Following are the steps which you need to proceed with if you are going to reset your Mediacom router using the manual reset method.

Step 1: Unplug Every Cable

The first step is to remove the cables from your router. If you are using a stand-alone router, remove its Ethernet Cable, and if it’s the Cable modem-router combo then remove its Coaxial Cable.

Also, remove the power cable adopter and let your router cool down for a few minutes.

Step 2: Initiate the Reset Process

Once the router is cooled down, plug your power cord again and wait for it to get stable power.

After that, locate the reset button at the back of your router.

Keep pressing it for 30 seconds approximately. Once the Multi-light of your router starts blinking, you can leave the button. It will take a while in the blinking process and eventually will show a stable light.

Step 3: Reconnect Every Wire

As soon as you see the Stable Light, reconnect your coaxial or ethernet cable to the router and wait for the internet light to glow.

Make sure that every wire is plugged properly and that there are no loose ends on each side of the wire.

Step 4: Make Configurations

It’s time for the desert after the meal. Your internet connection should be restored at this moment, and it will use the default configurations.

But by any chance, if your internet won’t work, you may need to make certain tweaks in the settings.

To do this, open the setting of your Mediacom router through your internet browser.

Once you are logged in, you have two options here.

  1. Simply open the restore tab on the network manager page and upload that file of configurations that you downloaded at the time of creating a backup. It will restore all the required settings.
  2. You can manually configure each detail by referring to those screenshots which you took earlier, but make sure to insert the correct detail each time so that it won’t lead to a “No Internet Connection” error.

After that, you are all set to use your internet using a freshly restored router.

Also Read: Review of Self Tested Modems Compatible with Blue Ridge ISP

How to Reset Mediacom Router Online Through Control Panel?

Sometimes you may not want to touch the hardware stuff physically or you may have tried the hard reset button method, but it didn’t work to recover connection loss. You can reset the router another way around.

You can do this by going to the Mediacom website and logging in to the control panel.

Step 1: Ensure Cables Connection

First, make sure that the router is connected to the internet and Ethernet Cable, or Coaxial Cable is plugged into your router or modem-router combo respectively.

Step 2: Log in to Control Panel

Then login into your Online Mediacom control panel using your Username and Password. Use this link to open the login page: https://homewifi.mediacomcable.com/prime-home/control-panel/login/

Step 3: Proceed with Reset Process

Once you have logged in, go to the Menu Page, and go to the settings by clicking on the gear icon.

There go to the System tab and click on the “Router” tab and then select the “Reset” button. This will reset the Router to its default settings.

Step 4: Check Internet Connection

After finishing your reset process, give your router around 2 to 3 minutes so that it can reinitiate everything.

You are all set to use your internet connection. Still, if your internet is not working, have a look at the internet connection light on your router and modem to make sure it’s not giving any errors.

Also Read: Best DOCSIS 3.1 Powered Modems List and Review

Find Mediacom Router Log-in IP

Sometimes your router has a different login IP Address which you may not know. In this case, you first need to know the correct login page IP of your router by the below-mentioned process.

For Windows Users:

  1. Go to the Start Menu and write CMD in the search bar to access Command Prompt on your PC. You can also open the command prompt by pressing the Window + R key and typing CMD in the Run search bar. then press the “Enter” key.
  2. Once Command Prompt is opened, you will see a Command-line interface window on your screen. Type ipconfig and press Enter.
  3. By hitting Enter button, the command will be executed, and your IP will be visible on your screen along with the other information about your current network status.

For Mac Users:

  1. Go to Finder then open Application, then Utilities, and navigate to Terminal.
  2. Then type netstat -nr on your screen and press the “Return/Enter” button on your keyboard.
  3. Your IP Address will appear on your screen instantly.

Troubleshooting Tips if you are Facing Issues in Resetting Router

If you encounter any trouble while resetting the router, then troubleshoot it using the following tips:

  1. Check if the power light is blinking or not. If it is not blinking, then that means there is no power supply to the router. Check if the power cord is properly plugged in or not. If not, then plug it in and wait for a few minutes for the router to get powered on.
  2. If the power light is blinking, then that means the router is getting power but still it is not resetting. In that case, check if the reset button is properly pressed or not. If not, then press and hold the reset button for 30 seconds.
  3. If the problem persists, then try unplugging the power cord from the router and wait for a few minutes. After that, plug in the power cord again and wait for the router to get powered on. Now try pressing and holding the reset button for 30 second.

Optimum Compatible Modems Detailed Review

Conclusion

Whether you’re having trouble resetting your router or just want to start fresh with your router settings, this guide will help to get the Mediacom router reset in no time. We have observed that Mediacom users constantly need to reset their routers which is why we created this in-depth guide on how to properly do it.

So you can follow the mentioned methods and steps to reset your mediacom compatible modems or router. If problem persists, you can ask us in the comments below.

Frequently Asked Questions (FAQs)

Why did my Mediacom modem reset itself?
There could be several reasons why your Mediacom modem reset itself. One possibility is that the modem experienced a power surge, which can cause it to reset. You may also need to reset the modem if you are experiencing connection problems.
How do I know if my Mediacom Modem is Reset?
After resetting your Mediacom modem, you should see the Mediacom Gateway Login screen. You will also see all the lights on the front of your modem turn green. If you don’t see these things, then your modem was not reset properly.
What does No Internet mean on a computer?
No Internet on a computer could mean that there is a physical issue with the device, such as a broken Ethernet port or cable. It could also mean that there is an issue with the network, such as the DNS server not responding.
How to reset the modem if you forgot your login details?
If you have forgotten the default password for your Mediacom router, you can reset it to the default settings. To reset your Mediacom router, look for the reset button on the back of the unit. Hold down the reset button for 30 seconds, and then release it. The router will restart, and the default settings will be restored.
Where to find the reset button on your Mediacom Router?
The reset button is a small, circular button that is recessed into the back of your Mediacom router. You can find it by looking at the back of the unit.

Latest Posts

Leave a Comment